DHCP Server Configuration with Multiple Scopes
Setup: Windows Server 2008: DHCP Server RRA Scree OS Firewall: Enabling DHCP Relay Agent Multiple VLANs Procedure: For testing purpose, we have taken 2 VLANs 192.168.2.0 / 21 (VLAN 2) & 192.168.50.0 /23 (VLAN 50) The DHCP server IP Address is 192.168.2.254 and it will release dynamic addresses to VLAN 2 as well as VLAN 50. Step 1 – Enable DHCP Server with Multiple Scopes Enable the DHCP services and create the necessary scopes as shown in the figure below on the DHCP Server 192.168.2.254 Open Routing and Remote Access console. Right click the server, and then click Configure and enable Routing and Remote Access. On the welcome page to Routing and Remote Access setup wizard page, click next. On the configuration page, select custom configuration, and then click next. On the custom configuration page, select LAN routing, and then click next. On the completing Routing and Remote Access setup wizard page, click finish. In Routing and Remot...